Macbook Key Replacement Cost (Quick Answer)
There is no Macbook Key Replacement Cost + or if it was broken because of Apple. If your MacBook qualifies for Apple’s Keyboard Service Program, you can get the keyboard fixed for nothing.
- Macbook Key Replacement Cost
- Does Apple Sell Replacement Keys?
- Is It Possible To Replace A Key On A Macbook?
- How Much Does A New Macbook Keyboard Cost?
- DIY Guide: How To Replace Your Macbook Pro Keyboard?
- How TO Clean Your Macbook Keyboard?
- Can An Apple Keyboard Be Repaired?
- Final Summary
- Frequently Asked Questions
Macbook Key Replacement Cost
The MacBook keyboard is notorious for being unreliable. Many consumers complain that the keyboards on their MacBooks repeat letters or don’t input any text at all. You can, however, get a new keyboard if you’re one of the users whose keyboard is working fine, but only one or a few of its keys are giving you trouble. Even one key on your MacBook can be changed. But what is the price? Let’s investigate.
However, if you don’t have AppleCare+ and accidentally break the key, you’ll have to spend anything from $350 to $700. However, there won’t be a fee if you are protected by AppleCare+ or consumer legislation. Find out if Apple offers replacement keys separately and if you can change them on your own by continuing to read. You can use the guide I included to fix a broken MacBook key.
Your MacBook is eligible for a free keyboard repair program if purchased between 2015 and 2019. Apple’s Keyboard Service Program covers all MacBooks that came with butterfly keyboards because they are prone to malfunction.
Consequently, you can receive a free repair for your key or the entire keyboard. However, if the damage falls under AppleCare+’s “Accidental Damage” category, you will need to fork over $299 to repair or replace your key.
Does Apple Sell Replacement Keys?
For MacBooks, Apple does not offer individual replacement keys. However, under AppleCare+ or consumer legislation, you can get a MacBook key fixed at an Apple Store for free.
If only one key is broken, you cannot get a replacement keyboard for your MacBook from an Apple shop. However, there’s always a local Apple store where you can get it mended. Alternatively, you can get it changed by purchasing a MacBook keyboard key from an independent store. Please resume reading to learn how to replace it on your own. I recently purchased a keyboard cover to have my MacBook well-protected from dust and grime.
Is It Possible To Replace A Key On A Macbook?
On the keyboard of your MacBook, one key can be changed. You may change a key by removing the existing ones and inserting a new one using a plastic key. If you don’t want to pay money to repair your keyboard at an Apple Store, you can fix it by removing the broken keys and replacing them with a new set using a flat plastic probe.
However, you should first determine whether your MacBook qualifies for the free Keyboard Service Program before going through with all that trouble. You won’t have to fix anything by yourself if it qualifies. You can request free repair work from Apple!
Your Apple MacBook keyboard may need to be changed if you have issues with the keys sticking or not working. It will cost a bunch of money to replace your MacBook keyboard with an Apple-authorized service provider.
However, taking your laptop to an independent service provider like iTweak can help you save some money. In this blog, we will discuss the price and service choices for replacing your MacBook keyboard in more detail.
How Much Does A New Macbook Keyboard Cost?
Your MacBook keyboard replacement can cost anything between $20 and $45. Your MacBook’s model, year, and the type of keyboard you need will all affect the pricing.
If the keyboard top casing has sustained significant damage, the entire keyboard assembly must be changed rather than just the keyboard.
DIY Guide: How To Replace Your Macbook Pro Keyboard?
Since the keyboard is attached to the entire assembly, replacing the keyboard on a MacBook Pro will need replacing the complete assembly. Use CPR’s DIY manual to accomplish this.
- Turn your MacBook Pro over to get started.
- By removing the 10 tiny screws holding the lower case to the rest of the MacBook Pro, you can remove it.
- Lift the laptop’s lower casing with care and set it aside. Peel back the warning label covering the battery connector to reveal the connector.
- Pry the battery connector from the logic board’s socket using a spudger. After that, arc the battery cables back out of the way.
- Find the three AirPort antenna cables and pry them apart from their sockets with your spudger.
- Push the camera’s connection cable out of its socket using the tip of your spudger.
- To release the glue, place the spudger beneath the rubber cover on the right fan, slide it along the length of the mechanism, and then raise and flip the cover back.
- Pull the AirPort/Camera cords from the fan from below the cover.
- Pry the rubber hinge covers off the right and left hinges once again with the spudger.
- Unscrew the hinge covers and brackets to remove the hinges.
- Pull the I/O Board connection out of the socket on the logic board, then unplug the I/O Board cable from the laptop after removing the I/O Board connector from the socket on the I/O Board.
- The Torx screw holding the AirPort card to the logic board must be removed.
- Pull the MacBook Pro’s AirPort card out slowly.
- Flip up the retaining flap and slide your spudger below it to release the right fan ribbon cable from the logic board.
- The right fan is fastened to the logic board with three screws. Take them out.
- Remove the MacBook Pro’s right fan by lifting it out.
- Remove the rubber cover from the fan’s left side using your spudger.
- Three screws hold the left fan to the logic board, so remove them.
- Locate the ribbon cable, raise the retaining flap, and slide your spudger underneath it to release the left fan from the logic board.
- Pull the SSD out of its socket on the logic board by unscrewing the little Torx screw holding it to the board.
- Using your spudger, open the I/O Board data cable lock, then turn it to the computer’s battery side. I/O Board data cable lock should be removed from the logic board socket.
- Lift the I/O board out of the lower case by removing the two Torx screws holding it to the logic board.
- After that, unplug the left and right speaker connectors from their sockets and the headphone jack connector.
- Pull the keyboard ribbon cable from the socket by finding it and finding it.
- Remove the trackpad ribbon cable connector from its socket on the logic board by gently prying it out.
- Remove the keyboard backlight’s connector using your spudger’s flat end.
- Next, locate the microphone ribbon cable, lift the retaining flap, and yank the cable out of the socket.
- Pull out the display data cable lock by turning it 180 degrees carefully.
- There is a raised screw head with a rubber cap next to the MagSafe 2 connector. Pry it away.
- Remove the six screws holding the logic board to the upper case.
- Lift the logic board out of the computer and turn it toward the top.
- Push the logic board’s MagSafe 2 connector away.
- Remove the logic board assembly from the gadget by lifting it.
- A single screw secures the left rubber hinge cover; to release it from the device, slide it out of the bezel. The right hinge cover is the same (note: the screw that holds the right rubber hinge cover should have been removed previously).
- Remove the laptop’s upper and bottom microphones.
- The MagSafe DC-In board is secured to the upper casing by two screws. The board can then be removed from the upper case assembly by sliding it to the right to release it from its recess.
- Unscrew the two screws securing the headphone jack to the upper case to remove it.
- Remove the three screws holding the left and right speakers to the device by removing the screws from each of them.
- The six screws holding the display to the upper case should then be removed.
- Pushing lightly on the upper casing will release the display component from it.
- Reverse these procedures to attach your new assembly to the upper case.
How TO Clean Your Macbook Keyboard?
Due to the fragility of MacBook Pro keyboards, debris like crumbs, dust, and dirt can easily interfere with the instrument’s mechanics. These molecules need to be driven out since, once inside, they render the keys useless. Blasting the problematic junk out from under the keys can be done using a can of compressed air.
Can An Apple Keyboard Be Repaired?
- Power down the keyboard.
- Flip the keyboard over.
- Do not let the keys get blotted.
- Pressurized air should be blown over it.
- Please wait 12 hours before using the keyboard again.
- Before you plug the keyboard back in, make sure it’s completely dry.
As you know Macbook Key Replacement Cost is free. The MacBook Pro keyboard is undoubtedly one of the device’s most used. Because of this, when your keyboard breaks or malfunctions, your productivity comes to a grinding halt. The Apple MacBook series has changed, and the business has worked to make its components better and more advanced.
Apple began using so-called “butterfly switches” in its more recent MacBook Pro laptop models. The butterfly mechanism was created to increase the size of each key while allowing the MacBook Pro to be thinner than ever.
Frequently Asked Questions
Where can I get specific keyboard keys?
Regrettably, most manufacturers do not sell individual keys; thus, replacing the entire keyboard is usually essential. But many laptop manufacturers provide keyboard key kits that include replacement keys and other hardware.
Cost to replace Apple keyboard?
Value of Apple Products According to the Official Store, It’s estimated that you’ll pay around $125. However, this does not apply to keyboards ruined by water or other liquids. Depending on the size and condition of your laptop, you should expect to pay between $600 and $1,300 for Apple’s repair services.
How come my Apple keyboard suddenly stopped working?
Inspect the USB ports for a problem. If you’re using the same Mac, try connecting the keyboard to a different USB port. You should unplug the keyboard and connect it back into your Mac with even more force. Verify that the USB port is clear of any obstructions (debris, dirt, etc.). If so, you should endeavor to get rid of it.