How To Tighten Attic Door Spring? Step By Step Guide

Are you looking for a way for How To Tighten Attic Door Spring? If “Yes” then you are at the right place. At each side of the unit are coil springs for pull-down attic stairs. The springs maintain the door closed and level with the ceiling by connecting to power arms at the top of the stairs.

Older stairs may have to lessen spring tension, which results in incomplete closure. With the door closed you can fix How To Tighten Attic Door Spring? By adjusting the springs. When installing new stairs, adjusting the springs is frequently the last step. A helper makes adjusting the springs on the attic stairs simpler.

How To Tighten Attic Door Spring?

Use an open-end wrench to remove each locking nut that holds the adjustment nuts on each threaded stem, advises William Wixon. As you watch the placement of the door face about the door frame, turn the adjustment nuts clockwise in equal increments.

Tighten Attic Door Spring

Things You Will Need

  • Work gloves
  • Wrench
  • Replacement spring(s)
  • Screwdriver

Ascend to the attic. When the attic ladder is folded up, the springs are most relaxed. Using a stepladder instead of the attic ladder could be a good idea if the springs are damaged.

Once you and your devotee are in the attic, close the door. Check the door hinge brackets where the springs are attached to the attic door frame. Depending on the attachment style of your attic ladder model, use a wrench or screwdriver to compress them up as much as you can if they are slack.

Grab one of the springs in the center while wearing your work gloves. Pull on the spring’s opposite end. Have your spouse carefully pry the spring’s hooked attached ring. It is attached while you pull. If both springs need to be replaced, repeat this process for the other.

Hook one end of the replacement spring or spring into the ring on the surrounding end. Pull the opposite end of the rope to attach it to the folding metal arm. If required, repeat for the other side. It would help if you rebalanced your attic ladder to make it seem brand-new.

You Are Fixing The Attic Ladder Spring

Quicker to fix the springs on is considerably easier and quicker than your attic ladder if you follow the methods listed below. Additionally, you will require the following tools, and then you are ready to go. Likely, you already possess these.

  • If you have it, a traditional wrench and socket are a wonderful enhancement.
  • Most of these require a screwdriver.
You Are Fixing The Attic Ladder Spring

The help of another hand (person, we know you have two hands). Now, stick to the instructions, and everything should be simple!

Step 1: Get Into The Attic

Your initial action will be to enter the attic from the upper side. The springs are noticeably more relaxed when the ladder is closed. There won’t be any stretching or other pressures because the ladder is upside down in its stowed configuration.

In addition, you can enter the attic using the stepladder instead. However, standing or climbing on it could result in an accident or a sudden injury if you are certain that its springs are in bad health; you shouldn’t do so. In this situation, you can enter the attic via a stepladder or outside the house.

To fix the attic ladder’s springs, you will need a spotter. Request assistance from a nearby individual by calling for a second hand.

Step 2: Check The Attic First

Using the stepladder, you can ascend to the attic. It would help if you closed the attic door after ensuring you and your assistant entered the attic. From there, you get the clearest view of the sg mechanics and can identify the issue.

Examine the brackets that are right in front of you at the door hinge. The springs are often fastened to the door frame of the attic ladder you have built inside your hallway at the brackets in most models.

Step 3: If The Springs Need To Be Tightened

If any springs appear broken, loose, or otherwise problematic, you should tighten them with a screwdriver. Or use the wrench I advised you to use at the start of the article.

Therefore, in this stage, you must tighten the slack springs. To avoid climbing up and down from the attic with the broken ladder, I advise bringing both tools the first time.

Avoid immobilizing the spring by overt, which he screws, since this may reduce flexibility.

Step 4: Should You Need To Replace Something

You should immediately replace the springs if you see that they don’t need to be tightened. Because if you take care of issues now, you won’t experience a problem again for as long as you own the home.

You must remove and repair the broken spring once you’ve located it. To reconnect the springs from the frame, you must now take the broken springs from the center and pull them. Your spouse will be required to hold the screwdriver for you. Repeat the procedure to replace the other spring if necessary. A two-person job for this component. Reattach the springs and tighten them as directed in Step 3.

Step 5: Test The New Springs

Make sure to lubricate the springs in this step—not with WD40, but with genuine grease. Then, slowly bring them down while keeping yourself out of harm’s way in case the springs give out. After using the ladder, both open and closed a few times, you should be good to go.


Fortunately, you were able to fix the attic ladder springs by understanding how to do so. However, you should get a new attic ladder as soon as possible if yours is not in a condition that can be repaired. But there will be a fee involved.

However, you can install a brand-new attic ladder for daily attic operations that is safe and secure. I sincerely hope you enjoyed reading this information on How To Tighten Attic Door Spring? Suppose you have any additional questions. Please inform me in the comment section. Continue reading and look for yourself.

Frequently Asked Questions

How much time would it take to repair the ladder spring?

The time frame can range from 30 minutes to an hour. If you have a helper, the task will be completed more quickly.

Which Ladder Should I Purchase For My Attic? Steel or aluminum?

Steel ladders are more expensive and durable. Ones made of aluminum are often inexpensive and flame-resistant. Depending on your needs and budget, pick one.

What kind of weight can the ladder springs support?

The weight capacity of ladder springs ranges from 225 to 275 lbs. Your ladder can support up to 350 lbs. if it is made of aluminum.

What is the price of ladder springs?

The cost of ladder springs is reasonable. They can set you back $5 to $10.

Can I Replace My Ladder Spring by Myself?

You certainly can. It would benefit if you did this by fixing the springs outside the attic using the second approach we described.

Similar Posts