Changed The Batteries In The Thermostat And Now Ac Not Working

You can do a few things if you Changed The Batteries In The Thermostat And Now Ac Not Working. Using a mix of user preferences and weather circumstances, the Honeywell room thermostat recommends and implements temperature adjustments.

Fast becoming a favorite among homes are its time-saving features, such as the automated Vacation Hold function, which keeps your HVAC system from turning on and off unnecessarily.

Your thermostat’s battery will need to be replaced every year or two. It’s simple to change the battery, but old batteries must be removed and replaced not an awful operation, but certainly inconvenient when you have to consider that you’ll have to do this eventually.

Make sure the batteries are placed correctly. The thermostat won’t work properly if you don’t use suitable batteries in most cases. A Honeywell thermostat that doesn’t operate after a battery charge can be fixed by verifying it has been properly charged and installed. Reset the thermostat to its original settings if the problem persists.

Changed The Batteries In The Thermostat

How To Fix Changed The Batteries In The Thermostat And Now Ac Not Working?

Make Sure Batteries Are Correctly Installed

It’s possible that the thermostat won’t operate if you’ve fitted the batteries incorrectly. Batteries must be installed appropriately to function properly. Keep the positive and negative battery ends apart. As a result, you won’t be able to regulate the temperature as precisely as you would like.

Replace the batteries by turning off the thermostat’s electricity first. Dismiss the old batteries by opening the battery compartment. Then, place two brand-new AAA batteries in the container with the right polarity. Turn your thermostat back on and let it do its job. A battery’s + and – designations are supposed to match those on its interior markings, so if you’re following instructions, you should insert them in that order.

Make that the batteries are oriented correctly in the battery compartment. Correct any errors by re-aligning the batteries in the proper orientation. Orienting the batteries with the right polarity is made easier by the marks within the battery compartment.

Replace All Batteries

The thermostat may stop working if you don’t replace all the batteries at once. New and old items should not be mixed. Always use new batteries when changing the batteries on your Honeywell thermostat. Your thermostat may have trouble if the old and new batteries have different charge levels.

Use The Right Battery

If the Honeywell thermostat doesn’t operate after a battery change, you may have installed the wrong batteries. The new batteries may not power your thermostat. Ensure your batteries are charged to the correct voltage by inspecting the battery compartment. They commonly use 1.5V AA batteries.

Problem With Wires

If your thermostat gives you an error code, you should reset it to see if it addresses the problem. You’ll need to contact a licensed HVAC contractor if the problem persists. It’s possible, for instance, that the cables connecting to your wall outlet are loosely connected to your thermostat.

When you start cooking, you won’t be able to decrease the temperature down if you disconnect the power. Ensure that the connection is properly attached to both wires by removing the wires from the wall. As a last check, ensure that no extra wires interfere with other parts’ operation.

Check Circuit Fuse Or Breaker

This means that even after changing the batteries on your Honeywell thermostat, the device won’t turn back on unless you replace your home’s fuse or reset the relevant circuit breaker. This is true even after you have replaced the batteries on your thermostat.

Factory Reset The Thermostat

If your thermostat isn’t working properly, performing a factory reset maybe your best bet. Be aware, however, that a Factory reset will restore your thermostat to its factory default settings if you follow through.

I will give you comprehensive instructions on factory resetting a Honeywell thermostat. I’ll go through each one in detail later. Here are the steps to resetting your thermostat:

  • Check to see if your thermostat is switched off.
  • Open the battery compartment door. Insert a coin or comparable object into the slot, press it in and then slide the compartment door open.
  • Remove the batteries now.
  • Replace the batteries in the battery holder in the reverse polarity specified by the markings.
  • Allow around five seconds for the batteries to rest in this position.
  • After that, remove the batteries and reinstall them in the proper position.
  • The display may now light up, indicating that it is operational.

Contact The Company

When everything else fails, you may need to hire an expert. If your thermostat isn’t working properly, speak with a local expert or a representative from Honeywell Customer Service. It’s possible that diagnosing the problem without the proper tools and expertise is too risky. Thus, hiring an expert is the best course of action.


So, how to fix the Changed The Batteries In The Thermostat And Now Ac Not Working? If none of the tips above help, you may be dealing with something beyond your control. You may want to call in the professionals if the problem is too difficult to solve on your own or if you risk damaging a more expensive element.

You’ve invested a significant sum of money in your thermostat, so you want to ensure it’s functioning properly. Many homeowners believe that if their thermostat malfunctions, they must repair it immediately. This isn’t always the case, of course. If your smart thermostat has been unused for a long period, it may just need a thorough cleaning or a new battery.

Frequently Asked Questions

Is it necessary to reset the thermostat after replacing the batteries?

Non-programmable digital thermostats require the simplest reset method of all types of thermostats. Remove the unit’s face and hold down the reset button for five seconds. You can also take the batteries out for five seconds. Your thermostat will immediately reset if you use one of the two methods.

Why does my Honeywell thermostat have no batteries?

If your thermostat isn’t battery-operated and is connected to your home’s electrical system, a blank screen could signal that the machine isn’t receiving electricity. What may be causing this? It could be caused by a tripped breaker or a wiring issue.

I don’t have a battery in my Honeywell thermostat, so how can I reset it?

To manually reset a thermostat, turn off the power control switch on the thermostat. Then, at your electrical panel, turn off the breaker. Wait a minute before turning both backs on. This should provide enough time for the system to reset.

Is there a battery in the Honeywell thermostat?

Two AA batteries are required for most Honeywell thermostats. However, to be safe, replace your batteries with the same size as before.

Similar Posts