Are 110 Volt Tanning Beds Any Good?
Here we start all about Are 110 Volt Tanning Beds Any Good? If you (or a couple of friends or family members) will be the only ones utilizing the tanning bed, there is no need to pay more. A household 110-volt bed will also be more suitable. Commercial beds require a circuit breaker because they are 220 volts.
Is 110-Volt Tanning Beds Effective?
The primary distinction is whether you want to be able to plug it into a conventional outlet or whether you are willing to use it in a single location with a unique circuit. A 220V device in the United States requires a particular circuit. Thus a 110 V unit would be more convenient if it is less than 18 amps. You may then plug it into a conventional 20-amp outlet.
More than 20 amps would necessitate a dedicated circuit so that the voltage wouldn’t be an issue. (Make sure you don’t have any other loads on that circuit simultaneously, or your breaker may trip.) With no safety buffer, 2200 Watts is the limit for a typical circuit with 20 amps x 110 V. At 1650 watts, a 15 A circuit will trip.
Along with the various voltages, you must also consider the wattage. A higher wattage would result in a quicker tan. But I assume that would also make you burn faster, so I’m not sure if that is a better option! Because most 24 lamp systems are 220 volts, an electrician will need to install a 220-volt wire to the bed.
Without the assistance of an electrician, a 110-volt bed can be readily relocated throughout the house. While this tanning bed has 24 lamps, it is marginally more powerful than a standard 16-lamp system.
What Are The Advantages And Disadvantages Of Utilizing 110 And 220 Volts?
If a hot wire is accidentally touched, 110V is safer. 220V lowers power losses on copper lines since it uses 1/2 the current for the same load as 110V, and copper losses using the same wire are 1/4. The original voltage of 110V was chosen because it was the desired value for early Edison light bulbs rather than for power delivery.
How Much Power Does An 110v Tanning Bed Consume?
Depending on the tanning bed, a normal 24-light Sun Master consumes less electricity than a handheld hairdryer. Even 220v tanning beds require a fraction of this. Depending on your state’s electricity costs, roughly 5 to 10 cents every tanning session.
Is It Worthwhile To Invest In A Tanning Bed?
Purchasing a Tan Bed If you only go to the tanning salon once or twice a month, a tanning bed may not be worth the money. On the other hand, a home tanning bed may be ideal for achieving a lovely tan by sunbathing for a few minutes each day.
The functioning voltage of a device has nothing to do with how well it will function and Are 110 Volt Tanning Beds Any Good? As intended, the gadget can run on either 110 volts or 220 volts, depending on the location and the usually available power in the area. When the current and voltage are mixed in the equipment that produces energy, the power, and quality of that energy are determined!
Frequently Asked Questions
Do tanning beds with 120 volts work?
A 120 to 240 Volt power source is required for most household tanning beds. Ensure the electrical outlet where your tanning bed will be plugged in is safe. To guarantee that you’re tanning bed works effectively, you may hire an electrician to install a higher voltage outlet.
What are the benefits of using 110v?
You are less likely to be electrocuted with a 110-VOLT supply. Because a smaller current is required, a 220-volt supply can transport electricity more cheaply, allowing you to use thinner cables and waste less energy through heat generated in the cables.
For a 110 tanning bed, what size breaker do I need?
For a bed with any number of lighting, a 20 amp circuit breaker is required. For a bed with more than 16 lighting, a 20 amp circuit breaker is required. Because tanning beds have numerous internal electrical parts and are costly, it is prudent to safeguard your investment.
Is a GFCI required for a tanning bed?
Your tanning bed circuit may need GFCI protection, which can be achieved by installing a GFCI circuit breaker compliant with the electric panel, depending on the location.